Connect sensor by a supplied RJ-11 (6P4C) cable to any sensor port “A1 .. A8”. Determination of the sensor type and connection will occur automatically.
Temperature sensor is built-in on a board and sticks out on the front panel of the unit for better measurement. Accuracy equals +/- 1°C.
The unit has two 12V 0.25A outputs (electronics relays). E.g. the appliance has the possibility to connect alarm beacons managed by built-in electronic relays.
Connecting CAN devices on a common bus allows you to collect data from the sensors with a large area, or from a large distance and to transmit them to the network.
Dry Contact Inputs
VT805 has 4 dry contact inputs. Can be used together with any contacts, for example with door or window contacts, circuit breakers etc.
Extension: Modbus Or 1-Wire
VT325 has the possibility to install “VT85 / Modbus extension board” or “VT10 / 1-Wire board” exntension (ordered separately).
VT325 has the possibility to install “VT85 / Modbus extension board” or “USB485 / RS-485 to USB adapter” exntensions (ordered separately).
Extension: GSM Modem
VT805 has the possibility to install GSM or USB modem. VT700 GSM modem is mounted and connected inside of master unit. It is used for sending SMS notifications and receiving SMS commands.
Using built-in interface it is possible to add up to four IP cameras. This will allows to view footagefrom surveillance cameras remotely,
One USB camera (class Linux UVC Webcam which supports MPEG) can be connected to “HS-USB” port. More USB devices can be connected to one HS USB port using USB hub.
USB Flash Drive
USB flash drive can be connected to VT805 using OTG miniUSB cable and can be used by the system for saving logs. More USB devices can be connected to one HS USB port using USB hub.
Power adapter is included in the package.
Chassis external ground earthing, to suppress electromagnetic interference.
Ethernet 10/100 Base-T port, provides network connection.